All repairs · Charlotte, NC
Commercial Door Repair Services in Charlotte
Nine kinds of commercial door repair, all within Charlotte, NC. Pick the door or hardware giving you trouble, or call (984) 217-8021 and describe what it's doing.

- 01Storefront Door RepairAluminum-and-glass entries that drag, sag or won't latch.
Common symptom: bottom edge scrapes the threshold. - 02Door Closer RepairDoors that slam, drift open or stop short of the latch.
Common symptom: door slams the last few inches. - 03Panic Bar & Exit Device RepairPush bars that stick, won't release, or won't relatch.
Common symptom: bar is hard to push or sticks down. - 04Commercial Door Lock RepairLocks that won't secure, keys that turn without locking.
Common symptom: key turns but nothing moves. - 05Steel (Hollow Metal) Door & Frame RepairSteel back doors and frames that rub, sag or rust.
Common symptom: door rubs the frame on the latch side. - 06Automatic Door RepairSliding and swing operators that stall, reverse or won't open.
Common symptom: door won't open on approach. - 07Fire Door RepairRated doors that won't self-close, latch or pass inspection.
Common symptom: door doesn't close on its own. - 08Emergency Commercial Door RepairBreak-ins, vehicle hits and doors that won't lock tonight.
Common symptom: door was pried open. - 09Commercial Door MaintenancePlanned service for buildings with many doors.
Common symptom: staff keep reporting the same door.
Side by side
Compare commercial door repairs at a glance
Use this table to find the right repair page. Urgency shows how soon the most serious symptom on that page should be handled.
| Repair | Typical symptoms | Usual cause | Urgency |
|---|---|---|---|
| Storefront Door Repair | Bottom edge scrapes the threshold; gap at the top is wider on one side | Worn bottom pivot, or the leaf has dropped | Book this week |
| Door Closer Repair | Door slams the last few inches; door stops before latching | Latch speed set too fast, or fluid loss | Call today |
| Panic Bar & Exit Device Repair | Bar is hard to push or sticks down; latch doesn't fully retract | Worn or dirty internal mechanism | Call now |
| Commercial Door Lock Repair | Key turns but nothing moves; locks when open, won't lock when closed | Broken cam or tailpiece, or a failed cylinder | Call now |
| Steel (Hollow Metal) Door & Frame Repair | Door rubs the frame on the latch side; hinge screws spin and won't hold | Hinges worn or the leaf sagging | Book this week |
| Automatic Door Repair | Door won't open on approach; stops or reverses mid-cycle | Activation sensor, power or a control setting | Call now |
| Fire Door Repair | Door doesn't close on its own; closes but doesn't latch | Closer weak, missing or obstructed | Call today |
| Emergency Commercial Door Repair | Door was pried open; glass broken in a storefront door | Bent strike, damaged frame or broken latch | Call now |
| Commercial Door Maintenance | Staff keep reporting the same door; hardware keeps working loose | Underlying alignment or closer problem | Plan a repair |
Choosing
How to choose the right repair
Start with the door type
A glass storefront, a steel back door and a fire-rated stairwell door have different hardware and different rules. If you know the door type, you're most of the way to the right page.
Then the symptom
Slamming and drifting point to the closer. Dragging and sagging point to hinges or pivots. Not locking points to the lock, the strike or alignment. Not opening for people leaving points to the exit device.
When two pages fit
Many symptoms involve two parts, such as a closer that can't latch a sagging door. Pick either page or call. The diagnosis on site covers the whole opening, not just the part named on the page.
When nothing fits
Use the Door Problem Finder on the homepage, or call and describe what the door does. Working out what's wrong is part of the job.
Know your door
Commercial door types in Charlotte buildings
The door type decides which parts can fail, which rules apply, and which repair page you need.
Aluminum storefront doors
Narrow or medium stile aluminum frames with glass. Common on retail, restaurant and office entrances. They usually hang on pivots and lock with a narrow deadbolt operated by a key cylinder.
Common failures: Pivot wear, drag on the threshold, and latch misalignment.
Storefront Door Repair →Hollow metal (steel) doors
Steel doors in steel frames, used for back doors, stairwells, mechanical rooms and loading areas. Built to take abuse, but their hinges and frames still wear out.
Common failures: Sagging leaves, stripped hinge reinforcement, and rusted frame bases.
Steel (Hollow Metal) Door & Frame Repair →Fire-rated doors
Steel or wood doors with a label showing a tested rating. They must close and latch by themselves, and they're inspected every year.
Common failures: Closers that don't close fully, latches that don't engage, and missing coordinators on pairs.
Fire Door Repair →Automatic entrances
Sliding or swinging doors driven by an operator, with sensors for activation and safety. Common in clinics, groceries, hotels and office lobbies.
Common failures: Sensor faults, worn rollers, and doors that stop or reverse mid-cycle.
Automatic Door Repair →Exit doors with panic hardware
Any door fitted with a push bar so people can get out with one push. Required on many assembly, educational and high-occupancy spaces.
Common failures: Sticking bars, latches that won't retract, and pairs that won't relatch.
Panic Bar & Exit Device Repair →Interior office and suite doors
Usually wood or steel doors with lever locksets or mortise locks, in offices, clinics and multi-tenant buildings.
Common failures: Loose or drooping levers, worn latches, and closers set too stiff for ADA.
Commercial Door Lock Repair →Not sure which repair you need?
Describe the door on the phone. Working out which part has failed is our job.